PumpMaster® SPDT (Single Pole, Double Throw) 20-foot cord 120 or 230 volt 20PMSPTDTWE 1004839 weighted mechanically-activated, wide-angle pump switch

PumpMaster® SPDT (Single Pole, Double Throw) 20-foot cord 120 or 230 volt 20PMSPTDTWE 1004839 weighted mechanically-activated, wide-angle pump switch 

SJE Rhombus Pump Switch Overview
Pumpmaster SPDT Product Information

Designed for direct control of pumps up to 3/4 HP at 120 VAC and 2 HP at 230 VAC for:
Water applications
Sewage applications

Pumpmaster SPTD can be wired to work in either pump down (normally open) or pump up (normally closed) applications.

SJE PumpMaster® SPDT pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

Can be wired to work in either pump down (normally open) or pump up (normally closed) applications (Single Pole, Double Throw)

Heavy-duty contacts

Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC

For direct wiring in 120 or 230 VAC applications

Adjustable pumping range of 7 to 36 inches (18 to 91 cm)

Includes standard mounting clamp and boxed packaging

SJE PUMPMASTER® SPDT PUMP SWITCH - Mechanically activated, wide angle switch designed for direct control of pumps up to 1/2

HP at 120 VAC and 1 HP at 230 VAC.

Part number code: Part # D PC = Pipe Clamp WE = Weighted Externally

Can be wired to work in either pump down (normally open) or pump up (normally closed) applications (Single Pole, Double Throw).

NOTE: Descriptions are grouped by cable length measured in feet (10, 15, 20, 30).

MOUNTING CLAMP is standard.

CABLE WEIGHT MOUNTING is also available.

PACKAGING: Boxed - Standard

ADDITIONAL CABLE: Longer cable lengths available.

Specifications:

PUMPING RANGE: 7 to 36 inches (18 cm to 91 cm)
CABLE: flexible 16 gauge, 3 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT: 3.05 inch diameter x 3.56 inch long (7.75 cm x 9.04 cm), high impact, corrosion resistant, PVC housing for use in sewage and water up to 140°F (60°C)

Other information:
PUMP DOWN is normally open contacts for emptying in water or sewage applications.
PUMP UP is normally closed contacts for filling in water or sewage applications.

DIRECT WIRING: Units used for direct wiring (without plug) may be used in either 120 VAC or 230 VAC applications within specified amp ratings.