PumpMaster® WPS 30PMWPSWE 15-f0ot cord 120 230 volt 1053697 mechanically-activated, wide-angle pump switch

PumpMaster® WPS 30PMWPSWE  15-foot cord 120 230 volt 1053697 mechanically-activated, wide-angle pump switch

SJE Rhombus Pump Switch Overview
Pumpmaster WPS Product Information

Designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC or control applications as low as 120 VAC, 100mA for:

Potable water applications

Water applications

It can be wired to work in either pump down (normally open) or pump up (normally closed) applications.

SJE PumpMaster® WPS float switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

Can be wired to work in either pump down (normally open) or pump up (normally closed) applications (Single Pole, Double Throw)

Heavy-duty contacts

Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC or control applications as low as 120 VAC, 100 mA

For direct wiring applications

Adjustable pumping range of 7 to 36 inches (18 to 91 cm)

Includes external cable weight and boxed packaging

CSA Certified to meet NSF/ANSI 61 standard for use in potable water; approved for use in tanks of 250 US gallons (950L) in volume or greater

per float

WE = Weighted Externally

Can be wired to work in either pump down (normally open) or pump up (normally closed) applications (Single Pole, Double Throw).

EXTERNAL WEIGHT is standard.

PACKAGING: Boxed - standard

CABLE: Flexible 16 gauge, 3 conductor

(UL, CSA) SJOW, water-resistant (CPE)

FLOAT: 3.05 inch diameter x 3.56 inch long (7.75 x 9.04 cm) high impact, corrosion resistant, PVC housing for use in potable water and water

up to 140°F (60°C)

ELECTRICAL: 120/230 VAC 50/60 Hz, 13 FLA, 85 LRA

NOTE: This switch must be used with pumps that provide integral thermal overload protection.

Minimum Electrical Load: 120 VAC, 100 mA

NOTE: This switch is not intended to control non-arcing loads.

PUMP DOWN is normally open contacts for emptying applications.

PUMP UP is normally closed contacts for filling applications.