Sensor Float Control Switch 30SWENO 1002170
Sensor Float Control Switch 30SWENO 1002170
$115.29

Sensor Float Control Switch 30SWENO 1002170

   0 reviews
Product Code:
Availability:
30SWENO
In Stock
$115.29
Ask about this product

1002170 3SWENO Sensor Float Control Switch, 30' cord, Weighted Externally, Normally open,  Mercury activated, narrow angle, non-potable water

SJE Rhombus Sensor Control Switch Specifications

SJE Rhombus Sensor Control Float Switch Installation

The Sensor Float® control switch is used to accurately monitor high (normally open) or low (normally closed) liquid levels to activate pump control panels and alarms in non-potable water and sewage applications.

Normally Open Models (high level): The control switch turns on (closes) when the float tips slightly above horizontal signaling a high level and turns off (opens) when the float drops slightly below horizontal.

Normally Closed Models (low levels): The control switch turns on (closes) when the float tips slightly below horizontal signaling a low level and turns off (opens) when the float tips slightly above horizontal.

This switch is not sensitive to rotation and is suitable for use with intrinsically safe circuits. Contact SJE Rhombus regarding specific intrinsically safe applications.

Suitable for use with intrinsically safe circuits

Control differential of .5 inches (1 cm) above or below horizontal

Options: For normally open (high level) or normally closed (low level) applications

In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters)

Three mounting options for flexibility in installation:

Mounting Clamp: for applications where the float can be attached to a discharge pipe or similar mounting device

Internally Weighted: for applications where the float can be suspended from above

Externally Weighted: for applications where the float can be suspended from above

UL Listed, CSA Certified

Five-Year Limited Warranty

Specifications:

CABLE: Flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE) jacket

FLOAT: 3.38 inches diameter x 4.55 inches long (8.58 x 11.56 cm) high impact, corrosion resistance, PVC housing for use in sewage and non-potable water up to 140°F (60°C)

MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 PSI (90 kPa)

MERCURY TILT SWITCH: Single pole, single throw, mercury-to-mercury contacts, hermetically sealed in a steel capsule and epoxy sealed in the float housing

ELECTRICAL: 5 amps, 120/230 VAC, 50/60 Hz

General
Activation Mode Mercury
Cable Length 30'
Operation Normally Open - Pump Down (empty)

Reviews (0)

   0 reviews
Write a review